I am using the DA9053 to power an imx6SLL from NXP.
As the DA9053 is not yet configured to power the iMX6, I need to prgram it before power up the iMX6.
How can I program the DA9053?
Do you have -00 parts? Do you have a sockted eval board?
We have DA9053-00C51 soldered on a board and we would like to program the firmware inside it for a iMX6SLL.
How we can do it if we don't have an EVK?
These parts cannot be programmed in system unfortunately. Our socketed eval board allows one part to be programmed at a time for initial testing and prototyping. However, for production a standard variant would have to be used or a custom variant would have to be generated.
At this moment in time we do not have a standard variant for the DA9053 and the i.MX6SLL.
How can I have a socketed eval board?
They can be obtained through Avnet. We have two different versions for the two different packages.