1)We designed a custom board using DA14531MOD-00F1DB-P BLE Module .
2)The issue is while trying to connect BLE Module (in custom Board) using "Smart snippet" software but it's keep loading and board didn't detected. (J link plus segger and SWD Interface used)
a)In our custom design "Reset" is pulled High using pull up resistor (Smart snippet software but it's keep loading and board didn't detected & in J link plus Green LED glowed).
b) In the next step removed pull up and trying to connect the BLE in costum board (Smart snippet software but it's keep loading and board didn't detected & in J link plus Red LED glowed).
3)But the Smart snippet software is able to detect BLE Module in development kit board "DA14531-00FXDEVKT-P" but unable to detect BLE Module in custom board .
4)We would like to know what is the "RESET"state of BLE Module (i.e.. pulled high or pulled low).
We Welcome any other suggestions.
Thanks in Advance.