14 posts / 0 new
Last post
phedrik
Offline
Last seen: 5 years 2 months ago
Joined: 2015-02-10 12:56
DA14580DEVKT-P seems reboot

Dear support,

When i plug the usb cable in dev kit. the DA14580DEVKT-P seem reboot.

In windows i heard the plug device sound and the D7 led blink slowly every +/- 2 sec.

J11 is set in USB MODE
UART is selected.

No com port is detected.

I have follow the UM-B-034 user guide.

Regards,

MHv_Dialog
Offline
Last seen: 1 month 1 day ago
Staff
Joined: 2013-12-06 15:10
Hi,

Hi,

It appears that the instructions are missing a step. You will have to download a driver for the FTDI chip on the board (this driver contains support for a standard serial port as well as a SPI bus)

Here is the Link to FTDI's download site http://www.ftdichip.com/Drivers/D2XX.htm

I will make sure that this step is added to the instructions ASAP. You ALMOST deserve a finders fee ;o)

phedrik
Offline
Last seen: 5 years 2 months ago
Joined: 2015-02-10 12:56
Thx !

Thx !

But :(, I have installed the driver :
C:\WINDOWS\system32\drivers\ftser2k.sys (MD5 : F1544BBC7E08BB5B9E9E97996C3FA04B)
C:\WINDOWS\system32\drivers\ftdibus.sys (MD5 : 13799CB7521A39724FFDEA2E5D9C8305)

Nothing change ! The dev kit seems reboot again !

Best Regards,

MHv_Dialog
Offline
Last seen: 1 month 1 day ago
Staff
Joined: 2013-12-06 15:10
Hi,

Hi,

With the correct driver loaded, you should see 2 serial ports appear in the Device Manager on your PC the moment you plug the board into the USB port. If this is not the case, I believe there may be a problem with either your PC or your devkit. Have you tried to reboot your PC (virtual COM ports and PCs aren't always playing nice).

phedrik
Offline
Last seen: 5 years 2 months ago
Joined: 2015-02-10 12:56
The devkit is detected as

The devkit is detected as Generic Usb Hub not as virtual serial port.

MHv_Dialog
Offline
Last seen: 1 month 1 day ago
Staff
Joined: 2013-12-06 15:10
That indicates a driver issue

That indicates a driver issue. Please uninstall the FTDI driver and install from the link I provided above.

phedrik
Offline
Last seen: 5 years 2 months ago
Joined: 2015-02-10 12:56
Nothing change

Nothing change

MHv_Dialog
Offline
Last seen: 1 month 1 day ago
Staff
Joined: 2013-12-06 15:10
Hi,

Hi,

Sorry to hear that. Please contact you local Dialog contact to have the issue resolved.

phedrik
Offline
Last seen: 5 years 2 months ago
Joined: 2015-02-10 12:56
Hi,

Hi,

Thx for your answer.

Regards,

phedrik
Offline
Last seen: 5 years 2 months ago
Joined: 2015-02-10 12:56
Hi,

Hi,

If i put J11 on 2-3 to active the battery power, D4 is usually powered on ?

Regards,

RvA
Offline
Last seen: 1 day 1 hour ago
Staff
Joined: 2014-02-07 14:10
Hi Phedrik,

Hi Phedrik,

Have you tried to connect the board to a different PC (after installing the drivers as discussed above)? Just to identify if there is an issue with the environment or with the board.

Best regards,

RvA

phedrik
Offline
Last seen: 5 years 2 months ago
Joined: 2015-02-10 12:56
Hi,

Hi,

I try on 3 PC ( 2 on windows 8 and 1 on Ubuntu)

The results is same.

Regards,

JE_Dialog
Offline
Last seen: 8 hours 6 min ago
Staff
Joined: 2013-12-05 14:02
Hellp Phedrik, I will

Hellp Phedrik, I will organise to send you another PRO motherboard in case this is a hardware fault. If it is the same on 3 PC's, i suspect a hardware issue. BR JE_Dialog.

 

phedrik
Offline
Last seen: 5 years 2 months ago
Joined: 2015-02-10 12:56
Hi,

Hi,

I receive the new motherboard !
Its work !

There is a picture : https://www.dropbox.com/s/7x4k7qp28y1p17j/IMG_20150224_110151.jpg?dl=0

Thx a lot !

Regards,