DA14531

Central - scanning for devices

Thu, 2020-10-29 13:35 -- adam.stroz

Hello,

I have a small questions, I configure my device as central (currently i'm using "da14531_ble_central_implementation" example). My question is, why Da14531 do not recognize android phone? Is android a BLE central or peripheral device? And second questions. When my device operate as peripheral, can i start connection with central?

如何使用SmartSnippets Toolbox v5.0.14.3080 电池生命周期估计工具

Wed, 2020-10-28 08:42 -- qijunGuo

我在使用Battery Lifetime Estimator工具的时候,有如下疑问,请解答。

1、下述的3个电流值,是指芯片内部RAM为保持数据所耗费的电流吗?我应该怎么确定它们的值呢?

           Retention current-SysRam3

           Retention current-SysRam2

           Retention current-SysRam1

2、下述的两个电流(SPI/I2C External Component Current),指的是器件本身的功耗吗?

      当SPI Transaction@2MHz 和 I2C Transaction @100KHz 这两个项目配置为零值时,我修改SPI/I2C External Component Current这两个参数,发现对电池寿命没有影响。

      我理解的是:这两个电流指在和SPI或I2C外设进行数据传输时,所消耗的动态电流,并没有计算SPI或I2C外设本身的静态功耗电流。我的理解是否正确?

 

3、 CPU extra processing time 这个参数是什么意思,我又怎么来确定它呢?

power consumption of "DA14531-DA14585-586 Simple beacon Example" is high

Tue, 2020-10-27 07:08 -- johnson_shanghai

HI:

I test your demo application "DA14531-DA14585-586 Simple beacon Example",  

Its power consumption is high compared to Demo "DA14531 ibeacon", you can see the power profiler tool snapshot in the attachment.

I want to know why its current is so high even set to sleep mode. 

Can you give me some guidence how to modify it to reduce power consumption.

Thanks a lot!

DA14531 Deep Sleep with Timer1

Sun, 2020-10-25 15:28 -- slvick0f1

I was able to use your "Deep Sleep Configuration" example to and successfully set up to wake from Timer1.  Using the Power Profiler I see that my average current consumption is around 40uA. 

I would like to achieve even lower average current consumption using the same setup, but perhaps modulating the Timer1 time to wakeup.  Looks like it might currently be waking up every 700msec.

Verifying the scaner's identity

Tue, 2020-10-20 08:51 -- hamiddhosseini

Hello there,

Is there a way to detect a previously paired device? 

I'm using the scan_request tracker example and ble_app_security and I'm able to print out the address of the device that has sent the scan request. However, I want to check this address and know when a device that has been paired and is disconnected, sends a scan request. 

Is there a way to verify if a device has been previously paired with?

Regards,

Hamid 

SmartBond_PLT_v_4.4.2无法运行

Tue, 2020-10-20 02:32 -- Lane

Hi Dialog

          我下载了SmartBond_PLT_v_4.4.2量产工具压缩包,解压缩后双击SmartBond_CFG_PLT.exe之后弹出:

failed to convert system string to char      erro:    cfg_gui_comon.cpp,是不是还需要安装其他软件。

Pages

Subscribe to RSS - DA14531