DA1468x

批量烧录工具无法正常烧录

Thu, 2019-10-10 06:48 -- Linchaoran

你好:

我通过使用最新的产测的烧录工具无法正常烧录,现在运行烧录后报下面的错误:

DUT_INTERNAL_SYSTEM_ERROR                         |   ERROR    |Internal system error. Firmware is=[H:\1_study\dialog\da1458x_da1468x_plt_v_4.3.0.310 (1)\DA1458x_DA1468x_PLT_v_4.3.0.310\executables\binaries\uartboot_68x.bin].Current device status=[191].

这里面uartboot_68x.bin是自己在sdk里面的uartboot工程编译生成的,请问通过什么来解决这个,谢谢

DA14683 USB Dev Kit QSPI Flash Debugging

Tue, 2019-10-08 06:40 -- jacobrast

Hi,

I am currently following the Getting Started guide to learn the hardward and software of the DA14683. 

When debugging the program using RAM, all symbols are read correctly, I am able to insert breakpoints, and step through the code as normal.

However, when using the QSPI flash debugging I am shown "No source available for "0x13ce". The thread will repeatedly hit this breakpoint, and the code does not execute.

Where to report dialog security vulnerability?

Tue, 2019-10-01 08:18 -- mgarbelix@gmail.com

Hi, I need to report a vulnerability that I've found in Dialog's SDK, but it seems dialog doesn't have a PSIRT contact to receive vulnerability reports.

Is there a recommended contact email from dialog to report vulnerability details? Would sending technical details to smartbond@diasemi.com be the correct email?

Thanks.

How to increase the length of time when wake up from wake up timer

Thu, 2019-09-26 09:49 -- Ryon

Hello,support,

when my device in power-down mode(extended_sleep),it can wake up from wake up timer,but I found that my device quickly enter to power-down mode again.

my question is how to increase the length of time when wake up from wake up timer.

Because I need to execute a long code when wake up,but I found that my device will go to sleep again and my code has not been executed yet.

Adding Sensors into DA14681 Wearable DK

Tue, 2019-09-24 18:49 -- mrdobson

Hi,

To give some background, I'm working with the DA14681 Wearable Development Kit and version 1.0.8 of the wearable SDK. I am using the "target_apps\wrbl" project from the software dev kit as a template. 

I am adding a new sensor via I2C and have built a working driver for the new device. I have been able to successfully read from (via printf statements to the UART) and write to registers on the sensor with a set of simple dummy functions that I run in main.c at boot.

How to add the SUOTA build configuration?

Tue, 2019-09-24 16:23 -- yingfen

Hi,

I want to use the SUOTA feature on my project. But my project does not include relevant build configuration (screenshot attached)

https://user-images.githubusercontent.com/32470088/65524792-0a4feb00-deb...

I don't find any related manual about how to include a new build configuration. So I try to import it from pxp_reporter, as the demo for SUOTA. (screenshot attached)

Pages

Subscribe to RSS - DA1468x