Is DA1468x or DA1469x pin to pin compatible with DA14583?

4 posts / 0 new
Last post
karanshah28
Offline
Last seen: 2 days 7 hours ago
Joined: 2018-07-14 11:10
Is DA1468x or DA1469x pin to pin compatible with DA14583?

Hi,

Is DA1468x or DA1469x pin to pin compatible with DA14583?

Regards,

Karan

Device: 
PM_Dialog
Offline
Last seen: 29 min 55 sec ago
Staff
Joined: 2018-02-08 11:03
Hi karanshah28,

Hi karanshah28,

Could you please clarify your question? What do you mean with the “compatible”? Do you want to connect the DA146xx to the DA14583?

Thanks, PM_Dialog

karanshah28
Offline
Last seen: 2 days 7 hours ago
Joined: 2018-07-14 11:10
Hi Dialog Team,

Hi Dialog Team,

Basically what i am trying to understand is, if i can replace the current board which is designed with DA14583 can be easily upgraded with DA146xx.

In order to leverage the features provided by new DA146xx series, can we easily upgrade by replacing with DA14583 in current design with DA146xx.

 

Regards,

Karan

PM_Dialog
Offline
Last seen: 29 min 55 sec ago
Staff
Joined: 2018-02-08 11:03
Hi karanshah28,

Hi karanshah28,

The DA1458x family devices are completely different from the DA146xx family devices, so you will not able to upgrade your custom design. You will have to proceed to a new schematics/PPCB design and then you should change the software implementation because the DA146xx based on an operating system called the FreeRTOS. I thing that the device that is more close to DA14583 is the DA14586 which has an embedded SPI Flash. I would highly suggest you to have a look at the DA14586 product and our new SDK6!

 https://www.dialog-semiconductor.com/products/connectivity/bluetooth-low-energy/smartbond-da14585-and-da14586

For SDK6 there are couple of software examples available on our support portal which might help you to getting started.

Thanks, PM_DIalog