⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at https://www.dialog-semiconductor.com/support . We’ll be fixing bugs / optimising the searching and tagging over the coming days.
4 posts / 0 new
Last post
Francisco Ramos
Offline
Last seen: 8 months 1 week ago
Joined: 2021-01-08 20:20
Footprint for device DA14585-00000VV2

Hello, I'm looking for your support on getting the recommended footprint for the component DA14585-00000VV2.

I'm interested in knowing your recommendations for such small design BGA packages: Do you recommend Soldermask defined pads or  Non-Solder Mask defined Pads, size of the copper pad, size of the mask aperture, routing traces recommendations, etc.

I found the footprint in the SnapEDA site, but it is dowloadable in several ecad formats  that I have not access to.

Besides, Not sure if that footprint from an external source, was already validated by your expert tem.

Is it possible to get the recommendded footprint direct from dialog in PDF format with all of your recommendations?

 

Thanks in advance for your support.

Keywords: 
Device: 
PM_Dialog
Offline
Last seen: 3 hours 56 min ago
Staff
Joined: 2018-02-08 11:03
Hi Francisco Ramos,

Hi Francisco Ramos,

Thanks for your question and for you interest in our BLE solutions.

I would recommend first checking the AN-B-054: DA14585/586 Application Hardware Design Guidelines document from the DA14585 support website. This document provides all the guideline you need for preparing schematics and PCB layouts for your application using DA14585/DA14586.

You can also check out the schematics and layout from the DA14585 DKs. All the HW collaterals are available online :

https://www.dialog-semiconductor.com/products/da14585-development-kit-pro

Thanks, PM_Dialog

Francisco Ramos
Offline
Last seen: 8 months 1 week ago
Joined: 2021-01-08 20:20
Hello, I already revise the

Hello, I already revise the links provided, but I'm still with a doubt. This particula component, is it a Collapse or Non-Collapse device? Could you please respond?  Thanks in advance!!

PM_Dialog
Offline
Last seen: 3 hours 56 min ago
Staff
Joined: 2018-02-08 11:03
Hi Francisco Ramos,

Hi Francisco Ramos,

Thanks for your comment. I’ve replied you on the below forum post :

https://support.dialog-semiconductor.com/forums/post/dialog-smartbond-bluetooth-low-energy-%E2%80%93-hardware-device-reference-designs/device-da14585

Thanks, PM_Dialog