After the key is triggered several times through GPIO interruption, the program stops, which is related to BLE interrupt.

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at https://www.dialog-semiconductor.com/support . We’ll be fixing bugs / optimising the searching and tagging over the coming days.
10 posts / 0 new
Last post
xuguodong
Offline
Last seen: 4 months 2 days ago
Joined: 2020-06-04 13:34
After the key is triggered several times through GPIO interruption, the program stops, which is related to BLE interrupt.

Hi Dialog teams,

HW:DA14683BB
SW:DA1468x_DA15xxx_SDK_1.0.14.1081
------------------------------------------------------------------------------------------------------------------------
Title:
按键通过中断触发,多次按下按键后,程序跑飞了。
After the key is triggered several times through GPIO interruption, the program stops, which is related to BLE interrupt.
------------------------------------------------------------------------------------------------------------------------
Analyze:
In Jtag debug state, the issue is reproduced, and it stops ASSERT_WARNING of slp_isr().
Change BLE_MAX_DELAYS_ALLOWED to 10, the issue can be improved, but it will still be reproduced.
In addition, this code and parameter:DG_ configIMAGE_ Setup is related, it‘s default is development_ MODE。
Try to change the parameter:DG_ configIMAGE_ Setup to production_ Mode, but the compilation reports an error.
Please refer to attached img.
Please help me to check.

Mail:15610103088@163.com

Phone:15610103088

Thanks && Regards

Device: 
PM_Dialog
Offline
Last seen: 2 months 2 weeks ago
Staff
Joined: 2018-02-08 11:03
Hi xuguodong,

Hi xuguodong,

This assertation means that the BLE woke up delayed and missed the event. Do you have a custom board? Are you using any of our SDK examples or you have your own application code? Additionally, what is the Low Power clock that is used? Is the RCX or an external XTAL32K?

Thanks, PM_Dialog

xuguodong
Offline
Last seen: 4 months 2 days ago
Joined: 2020-06-04 13:34
Hi PM_Dialog,

Hi PM_Dialog,

HW:DA14683-00A9DEVKT-P 

On the basis of Daemon:hogp_device, I enabled uart debug.

When test_count is 44, the system stops.

Eg.

[10:57:38.945]收←◆Philip ============================== test_count 44

Code:

in custom_config_qspi.h

+#define CONFIG_RETARGET
+#define CONFIG_RETARGET_UART                    HW_UART2

void hogp_device_wkup_handler(void)
{
+        static uint16_t test_count;
+        printf("Philip ============================== test_count %d\n", test_count++);
        OS_TASK_NOTIFY_FROM_ISR(current_task, WKUP_NOTIF, eSetBits);
}

 

PM_Dialog
Offline
Last seen: 2 months 2 weeks ago
Staff
Joined: 2018-02-08 11:03
Hi xuguodong,

Hi xuguodong,

The SDK sets the BLE_MAX_DELAYS_ALLOWED macro to zero, so please change from 10 to 0. As mentioned before, this assertation means that the BLE woke up delayed and missed the event. So please try to avoid printf in this callback. If you remove the printf(), are you able to run it correctly?

Thanks, PM_Dialog

xuguodong
Offline
Last seen: 4 months 2 days ago
Joined: 2020-06-04 13:34
Hi Dialog teams,

Hi Dialog teams,

1.Are you sure printf caused this issue?

2.Where is the value of BLE wake up delay?

Thanks

PM_Dialog
Offline
Last seen: 2 months 2 weeks ago
Staff
Joined: 2018-02-08 11:03
Hi xuguodong,

Hi xuguodong,

If you remove the printf(), are you able to replicate this issue?

Thanks, PM_Dialog

xuguodong
Offline
Last seen: 4 months 2 days ago
Joined: 2020-06-04 13:34
Hi Dialog teams,

Hi Dialog teams,

If you remove the printf(), it is okay. 

Thanks

Can you help me to check Interval value of BLE wake up?

What is the main function of ble wake up?//rwble.c里有一个slp_isr()函数

 

 

PM_Dialog
Offline
Last seen: 2 months 2 weeks ago
Staff
Joined: 2018-02-08 11:03
Hi There,

Hi There,

Can you please clarify this : “Can you help me to check Interval value of BLE wake up” ?

Thanks , PM_Dialog

xuguodong
Offline
Last seen: 4 months 2 days ago
Joined: 2020-06-04 13:34
Interval time of ble wake up

Interval time of ble wake up:ble wake up的间隔时间

PM_Dialog
Offline
Last seen: 2 months 2 weeks ago
Staff
Joined: 2018-02-08 11:03
Hi xuguodong,

Hi xuguodong,

Sorry but still is not clear enough. Do you mean how muck it takes to wake up?

Thanks, PM_Dialog