3 posts / 0 new
Last post
lawisme
Offline
Last seen: 7 months 8 hours ago
Joined: 2021-01-05 03:36
IDE搭配J-link燒錄報錯

Hi Dialog,

我使用SmartSnippets Studio中的IDE搭配外置的J-link燒錄FW時,系統會報錯,報錯前是可以燒錄的,也沒有改動過任何配置,這個問題突然就出現了。拔插J-link、重啟電腦、重新編譯cli_programmer工程均不能解決。以下是我的工程環境,請協助解決,謝謝!

OS:windows 10 64 bits

SmartSnippets Studio version:v2.0.14.1748

External Tool: program_qspi_jtag

SEGGER J-link version: V6.40

SDK version:10.0.10.119_LiteOs

以下是出現問題時console的log:

........................................................................................................................
..
.. PROGRAM QSPI
..
........................................................................................................................
.
........................................................................................................................
..
.. Programming image
..
........................................................................................................................
cli_programmer 1.26
Copyright (c) 2015-2019 Dialog Semiconductor

Failed to bind to socket 

cannot open gdb interface - reason: -200

.
........................................................................................................................
. ERROR:
. cli_programmer.exe" has exited with code: 1

. call: "E:\SDK10.0.10.119_LiteOs\binaries\cli_programmer.exe" --cfg C:\Users\peter.li\AppData\Local\Temp\tmpanuyhkyn --check-booter-load --no-kill gdbserver write_qspi 8192 C:\Users\peter.li\AppData\Local\Temp\tmpj6_4sr6t
........................................................................................................................
.
.
........................................................................................................................
..
.. FINISHED
..
........................................................................................................................

 

Device: 
lawisme
Offline
Last seen: 7 months 8 hours ago
Joined: 2021-01-05 03:36
Hi Dialog,

Hi Dialog,

看來是板子的問題。換了一塊板子,就可以燒錄了

lewis zhang
Offline
Last seen: 1 hour 21 min ago
Staff
Joined: 2020-07-13 04:20
您好,lawisme!

您好,lawisme!

感谢提问,以后应用中有任何问题,都可以在论坛留言。

Br

Lewis