Flashing binary using JLink

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at https://www.dialog-semiconductor.com/support . We’ll be fixing bugs / optimising the searching and tagging over the coming days.
2 posts / 0 new
Last post
apoudret
Offline
Last seen: 3 years 2 weeks ago
Joined: 2017-09-22 08:33
Flashing binary using JLink

Hello,

I would like to know if it possible to flash the firmware binary (.bin) on my Dialog board using the JLink tool, without using cli_programmer. The only JLink commands I need are connect, reset and loadBin.

Thank you,
Andy Poudret

Device: 
IM_Dialog
Offline
Last seen: 1 year 8 months ago
Joined: 2016-12-06 22:25
Hi Andy,

Hi Andy,

At present we only support programming the flash using the cli_programmer. If you are having problems using this method let us know and we should be able to help.

Best regards

IM_Dialog