flashing code in DA14531 using DA14585 dev kit-Basic

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at https://www.dialog-semiconductor.com/support . We’ll be fixing bugs / optimising the searching and tagging over the coming days.
6 posts / 0 new
Last post
deshpandead
Offline
Last seen: 2 years 6 months ago
Joined: 2018-03-17 12:29
flashing code in DA14531 using DA14585 dev kit-Basic

HI,

If I take out SWDIO and SWCLK and Gnd, from DA14585 DEV kit Basic and connect it to the DA14531 based custom board's(working on separate 3.2 V Supply )respective pins then Can I flash the code in DA14531?.

Please let me know.

Regards,supply

Abhijeet 

 

 

Device: 
PM_Dialog
Offline
Last seen: 6 months 3 weeks ago
Staff
Joined: 2018-02-08 11:03
Hi deshpandead,

Hi deshpandead,

I tried to download firmware to our DA14531 daughter board thought a DA14585 Basic DK. The wiring is same with your setup. JTAG is recognized correctly in the ARM Keil IDE and the firmware is downloaded correctly to the System-RAM.  Since you have a custom board. I would suggest you giving a try and let me know with the results.

Thanks, PM_Dialog

deshpandead
Offline
Last seen: 2 years 6 months ago
Joined: 2018-03-17 12:29
HI,

HI,

Thanks!.Let me check it out and will let you know about the result.

Regards,

Abhijeet

PM_Dialog
Offline
Last seen: 6 months 3 weeks ago
Staff
Joined: 2018-02-08 11:03
Hi deshpandead,

Hi deshpandead,

Yes please. I am waiting your feedback.

Thanks, PM_Dialog

deshpandead
Offline
Last seen: 2 years 6 months ago
Joined: 2018-03-17 12:29
HI,

HI,

I am able to flash the code successfully in DA14531 based custom board same way as you have done.

Thanks

PM_Dialog
Offline
Last seen: 6 months 3 weeks ago
Staff
Joined: 2018-02-08 11:03
Hi deshpandead,

Hi deshpandead,

Glad that you are able to flash your DA14531 custom board through the 585 Basic DK. If you found the answer useful please mark it as “accepted” for the other forum users.

Thanks, PM_Dialog