PLT QSPI initialization error

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at https://www.dialog-semiconductor.com/support . We’ll be fixing bugs / optimising the searching and tagging over the coming days.
5 posts / 0 new
Last post
Trapprjim
Offline
Last seen: 8 months 2 weeks ago
Joined: 2015-11-23 20:25
PLT QSPI initialization error

We are getting the following result when we try to flash using SmartBond v4.4.2, we are using an ISSI IS25WP080D serial flash.  does this need to be an added device in order to initialize?  I started to look at setting this up but I'm not sure I understand where to get the correct information that needs to be used.

|13:11:52.581  |DUT_UDLL_QSPI_INIT_INIT                           |  STARTED   |QSPI initialization operation initialized.
|13:11:52.583  |DUT_UDLL_QSPI_INIT_STARTED                        |  STARTED   |QSPI initialization operation started.
|13:11:52.664  |DUT_UDLL_QSPI_INIT_FAILED                         |   FAIL     |QSPI initialization operation FAILED. JEDEC ID is [0x9d, 0x70, 0x14].Current device status=[253].
|13:11:52.664  |DUT_UDLL_QSPI_INIT_FAILED                         |   FAIL     |QSPI initialization operation FAILED. JEDEC ID is [0x9d, 0x70, 0x14].Current device status=[253].

Thank You, Jim

 

Device: 
PM_Dialog
Offline
Last seen: 2 days 9 hours ago
Staff
Joined: 2018-02-08 11:03
Hi Jim,

Hi Jim,

Thanks for your question. Let me check this and I'll get back to you shortly.

Thanks, PM_Dialog

PM_Dialog
Offline
Last seen: 2 days 9 hours ago
Staff
Joined: 2018-02-08 11:03
Hi Jim,

Hi Jim,

Please check UM-B-041: SmartBond Production Line Tool User Manual [DA14531 and DA1469x] and Appendix Y DA1469x Supported QSPI Flash Memories.

The ISSI IS25WP080D is not included in the DA1469x Supported QSPI Flash Memories. To support a QSPI flash memory that is not in the list, follow the DA1469x QSPI Flash Support {#flash_support} instructions in readme.md file located under SDK_10.0.8.105\sdk\bsp\memory\ folder to manually add it inside the uartboot.bin firmware.

Can you please indicate if you have already done this?

Thanks, PM_Dialog

Trapprjim
Offline
Last seen: 8 months 2 weeks ago
Joined: 2015-11-23 20:25
Hello,

Hello,

        I used the qspi_XXX_template to create the driver file, I am not sure I have all the necessary information.  I also modified custom_config with the macro for the new driver.  I'm not sure from the file how to actually implement this for use by the PLT tool.  I've include what I have so far.  This is a little out of our normal role so I'm not up to date on how to complete some of the requirements.  I typically work with LabView and TestStand for production test systems.

Thank you, Jim

Attachment: 
PM_Dialog
Offline
Last seen: 2 days 9 hours ago
Staff
Joined: 2018-02-08 11:03
Hi Jim,

Hi Jim,

Please take a look at the DA1469x Tutorial Flash Driver Creation . Did you follow this tutorial?

Thanks, PM_Dialog