SmartSnippets Not Running Properly

⚠️
Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at https://www.dialog-semiconductor.com/support . We’ll be fixing bugs / optimising the searching and tagging over the coming days.
7 posts / 0 new
Last post
derekwright
Offline
Last seen: 11 months 1 week ago
Joined: 2020-05-25 18:36
SmartSnippets Not Running Properly

Hello,

I am setting up a new Linux Ubuntu 18 install with SmartSnippets. I followed the directions here: https://www.dialog-semiconductor.com/sites/default/files/user_manual_um-...

I have the SDK installed and extracted in the same directory as I have selected as my workspace.

I first installed the SDK (and hotfix) into a fresh directory. Then I ran the .run file, selected the Install recommended JLink option, and then ran SmartSnippets by running the DiaSemi/SmartSnippetsStudio/CDT/SmartSnippets_Studio.startup.sh script.

When I do this I select the same directory with my SDK 1.0.14 installed. After I select that a blank Welcome screen is all I get. The link above tells me the SDK Tools Installer should be launched immediately but it is not.

If I try to import a project that I know works on another Linux machine with SmartSnippets, it tells me it can't find the arm gcc cross-compiler, even though I can see it exactly where PATH expects it...

Please help,

Derek

Device: 
derekwright
Offline
Last seen: 11 months 1 week ago
Joined: 2020-05-25 18:36
For example, importing the

For example, importing the ble_adv demo project and attempting to build results in this output in the console:

10:39:07 **** Incremental Build of configuration DA14683-00-Release_QSPI for project ble_adv ****
make --silent pre-build main-build
Generate linker scripts.
/bin/sh: 1: arm-none-eabi-gcc: not found
../makefile.targets:11: recipe for target 'mem.ld' failed
make[1]: *** [mem.ld] Error 127
 
Building file: /home/sensor/Microsensor/sdk/bsp/startup/config.c
Invoking: Cross ARM C Compiler
/bin/sh: 1: arm-none-eabi-gcc: not found
make: *** [startup/config.o] Error 127
startup/subdir.mk:31: recipe for target 'startup/config.o' failed

 

Running the following command gives me:

$ locate arm-none-eabi-gcc
/home/myusername/DiaSemi/SmartSnippetsStudio/GCC/4_9-2015q3/bin/arm-none-eabi-gcc

 

and looking up the PATH variable gives me:

/home/myusername/DiaSemi/SmartSnippetsStudio/GCC/4_9-2015q3/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/myusername/DiaSemi/SmartSnippetsStudio/Tools/mingw64_targeting32/bin:/home/myusername/DiaSemi/SmartSnippetsStudio/Tools/doxygen/doxygen-1.8.9.1/bin

 

The first entry is where the compiler is located...

 

PM_Dialog
Offline
Last seen: 2 weeks 4 min ago
Staff
Joined: 2018-02-08 11:03
Hi Derek, 

Hi Derek, 

Thanks for your question. Can you please indicate the version of the SmartSnippets Studio? Is it version 1.6.3 or 2.0.14 or any other?

Thanks, PM_Dialog

derekwright
Offline
Last seen: 11 months 1 week ago
Joined: 2020-05-25 18:36
Yes, it is 1.6.3.

Yes, it is 1.6.3.

Thanks,

Derek

PM_Dialog
Offline
Last seen: 2 weeks 4 min ago
Staff
Joined: 2018-02-08 11:03
Hi Derek, 

Hi Derek, 

Thanks for the indication. Let check it and I'll revert back to you.

Thanks, PM_Dialog

derekwright
Offline
Last seen: 11 months 1 week ago
Joined: 2020-05-25 18:36
Thanks, I appreciate it.

Thanks, I appreciate it.

PM_Dialog
Offline
Last seen: 2 weeks 4 min ago
Staff
Joined: 2018-02-08 11:03
Hi Derek,

Hi Derek,

We'll follow up directly (offline from the forum ).

Thanks, PM_Dialog