How to feed in signals on test point son GreenPak advanced emulation platform

8 posts / 0 new
Last post
ajeya
Offline
Last seen: 5 months 3 weeks ago
Joined: 2018-09-17 22:12
How to feed in signals on test point son GreenPak advanced emulation platform

Feeding in CAN signals to test points on the emulation platform and clicking emulate gives me a variety of errors and warning from
check if chip is present
check if chip is oriented correctly
and so on

How to over come this?

Device: 
Device Number: 
Any
PavloZ
Offline
Last seen: 13 hours 4 min ago
Staff
Joined: 2018-01-31 12:50
Hi ajeya, the test points are

Hi ajeya, the test points are intended for test equipment connecting only. There are buffered expansion connector for external test signals connecting. The development board can be damadged if pest points are used as external inputs. Thanks.

ajeya
Offline
Last seen: 5 months 3 weeks ago
Joined: 2018-09-17 22:12
Where do I find buffered

Where do I find buffered expansion connector for external test signals?

PavloZ
Offline
Last seen: 13 hours 4 min ago
Staff
Joined: 2018-01-31 12:50
Hi ajeya, please find

Hi ajeya, please find attached picture. Do you have the same board? Also please refer to the Development Platform User Guide

https://www.dialog-semiconductor.com/sites/default/files/greenpak_advanc...

Attachment: 
ajeya
Offline
Last seen: 5 months 3 weeks ago
Joined: 2018-09-17 22:12
What if I used the test

What if I used the test points on the platform?
Is it ok to use them, to feed in the signals?

Attachment: 
PavloZ
Offline
Last seen: 13 hours 4 min ago
Staff
Joined: 2018-01-31 12:50
Hi ajeya, it's easy to

Hi ajeya, it's easy to damadge the development board feeding in the signals.

ajeya
Offline
Last seen: 5 months 3 weeks ago
Joined: 2018-09-17 22:12
What are the limits of

What are the limits of voltage accepted by the test point on the advanced platform board?

PavloZ
Offline
Last seen: 13 hours 4 min ago
Staff
Joined: 2018-01-31 12:50
Hi ajeya, the external

Hi ajeya, the external voltege shouldn't be higher than chip's VDD and you should be sure that PINs are configured as inputs without any generators or buttons. Otherwise the development board will be damadged.