HowTo read V(oh) from manual

Hi there.. thanks for coming to the forums. Exciting news! we’re now in the process of moving to our new forum platform that will offer better functionality and is contained within the main Dialog website. All posts and accounts have been migrated. We’re now accepting traffic on the new forum only - please POST any new threads at . We’ll be fixing bugs / optimising the searching and tagging over the coming days.
2 posts / 0 new
Last post
Jens Michaelsen
Last seen: 2 years 1 month ago
Joined: 2016-11-04 06:21
HowTo read V(oh) from manual

for the SLG46108 the manual states in table 5.3 as electrical
characteristic V(oh) for 3.3 Volt as 2.864 V for 2x drive as Min. value.
Does this reference to 3.3 Volt -10%, or doe we need to reduce this further??
Thanx, Jens M.

Device Number: 
Last seen: 2 years 8 months ago
Joined: 2018-01-31 12:50
Hi Jens,

Hi Jens,

yes this value refers to VDD = 3.3 Volt -10%

But please note that 2.864 V for 2x drive specified for 3mA load.

Thanks for your question!