Vin bypass requirements for SLG59M1496V

2 posts / 0 new
Last post
jkkaiam
Offline
Last seen: 3 months 5 days ago
Joined: 2018-11-14 00:58
Vin bypass requirements for SLG59M1496V

The SLG59M1496V layout guide says both a 0.1uF and 10uF cap are needed on Vdd. This is a little high for our application. Can the part operate correctly with a lower Vdd bypass (say a single 1uF MLCC)? We'll be running at 3.3V.

Device: 
Device Number: 
SLG59M1496V
PavloZ
Offline
Last seen: 2 days 14 hours ago
Staff
Joined: 2018-01-31 12:50
Hi jkkaiam,

Hi jkkaiam,

In general SLG59M1496 doesn’t require capacitors for VDD but we recommend to set it in case you have poor power supply design. If you have good clear power rail, so 1uF is also fine.