DA9053 Evaluation kit

6 posts / 0 new
Last post
DamienEffinnov
Offline
Last seen: 5 days 13 hours ago
Joined: 2019-03-28 14:07
DA9053 Evaluation kit

Hello,

I am using the DA9053 to power an imx6SLL from NXP.

As the DA9053 is not yet configured to power the iMX6, I need to prgram it before power up the iMX6.

How can I program the DA9053?

Thanks

Regards,

Damien

 

Device: 
ED_Dialog
Offline
Last seen: 2 days 7 hours ago
Staff
Joined: 2017-09-18 11:54
Hello Damien,

Hello Damien,

Do you have -00 parts? Do you have a sockted eval board?

kind regards,
Elliott Dexter 

DamienEffinnov
Offline
Last seen: 5 days 13 hours ago
Joined: 2019-03-28 14:07
Hello Elliot,

Hello Elliot,

We have DA9053-00C51 soldered on a board and we would like to program the firmware inside it for a iMX6SLL.

How we can do it if we don't have an EVK?

Regards,

Damien

ED_Dialog
Offline
Last seen: 2 days 7 hours ago
Staff
Joined: 2017-09-18 11:54
Hello Damien,

Hello Damien,

These parts cannot be programmed in system unfortunately. Our socketed eval board allows one part to be programmed at a time for initial testing and prototyping. However, for production a standard variant would have to be used or a custom variant would have to be generated.

At this moment in time we do not have a standard variant for the DA9053 and the i.MX6SLL.

Kind regards,
Elliott

DamienEffinnov
Offline
Last seen: 5 days 13 hours ago
Joined: 2019-03-28 14:07
Elliot,

Elliot,

How can I have a socketed eval board?

Regards

ED_Dialog
Offline
Last seen: 2 days 7 hours ago
Staff
Joined: 2017-09-18 11:54
Hello Damien,

Hello Damien,

They can be obtained through Avnet. We have two different versions for the two different packages.

Kind regards,
Elliott