4 posts / 0 new
Last post
Airpop
Offline
Last seen: 3 years 6 months ago
Joined: 2015-07-07 03:25
Question about DA14583F01DEVKT-B

Hi,

I got the DA14853 development kit DA14583F01DEVKT-B and installed Keil MDK, Jlink driver and FTDI driver following the user manual UM-B-025. Everything goes fine but when I plugged the board into the PC using the USB cable there is no new device detected. D5 (red) is blinking. D4 is off. D1 is on. Look like the Atmel chip on the kit is not programmed? Could anybody help me on this?

Device: 
MT_dialog
Offline
Last seen: 2 weeks 3 days ago
Staff
Joined: 2015-06-08 11:34
Hi Airpop,

Hi Airpop,

The Atmel chip not to be programmed its a bit unlikely. In the device manager, in the ports section are you able to see your board ? Have you tried a different USB port ? Try re-installing the SEGGER JLIink driver maybe this will fix your probelm. 

Thanks MT_dialog

Airpop
Offline
Last seen: 3 years 6 months ago
Joined: 2015-07-07 03:25
No, there is no new device

No, there is no new device when plugging the board. I tried on different USB ports and different machines. I also tried re-installing Jlink driver and FTDI driver. Same problem.

Airpop
Offline
Last seen: 3 years 6 months ago
Joined: 2015-07-07 03:25
No new COM port and no new

No new COM port and no new device in the device manager.